Products

Showing 1–24 of 51 results

Views:

ARC Turntables

  • 10,000 lb Floor Turntable @ 12″ with 36″ Tabletop
  • 20,000 lb Floor Turntable @ 12″ with 48″ Tabletop
  • 40,000 lb Floor Turntable @ 12″ with 60″ Tabletop
  • 80,000 lb Floor Turntable @ 12″ with 72″ Tabletop

FLEXFAB™: Flexible Fabrication 3D Robotic Cutting System

ARC collaborated with KUKA, Hypertherm, and RobotMaster to create the FlexFab™: Flexible Fabrication 3D Robotic Plasma Cutting Cell, an integrated system that converts CAD models into a 3D plasma cut steel part, saving time and labor hours via precision control.

SnapCut by ARC Specialties

SnapCut allows non-welders and non-robot operators the ability to cut shapes into three-dimensional, structural-steel components easily.

ARC-05HG PLC GTAW Horizontal Bore Cladder

Standard ARC 5 PLC control unit with touchscreen operator interface, weld schedule storage, and process monitoring through Lincoln Electric’s …

ARC-05HM HCD GMAW Welding System

Features A remote control system that couples the operator to the process Vision system displays the position of …

ARC-05HM Horizontal GMAW Cladder

The ARC-05HM Horizontal GMAW Cladder allows for high deposition rates for ID and OD welding. The system is integrated with a pulsed power supply and Lincoln Electric’s Power Wave Manager Software to provide maximum weld parameter control and process monitoring. ARC 5 PLC controls with touch screen operator interface steers the servo-driven cross slides and headstock with 3-jaw chuck.

ARC-05HV Horizontal and Vertical Bore Cladding System

The ARC-05HV Cladding System has both vertical and horizontal welding capabilities which allow for a variety of welding applications. The system comes standard with two servo-driven, 3-jaw chuck headstocks, and 60” cross slides to provide a quick transition between vertical and horizontal cladding setups. A standard ARC 5 PLC control unit with a touchscreen operator interface controls each setup. With the ARC-05HV, your vertical cladding system and your horizontal cladding system can occupy the same floor space and share the same operator interface.

ARC-05HV Horizontal Vertical Cladding System with Elbow Capacity

The ARC-05HV Cladding System has both vertical and horizontal welding capabilities which allow for a variety of welding applications. The system comes standard with two servo-driven, 3-jaw chuck headstocks, and 60” cross slides to provide a quick transition between vertical and horizontal cladding setups. A standard ARC 5 PLC control unit with a touchscreen operator interface controls each setup. With the ARC-05HV, your vertical cladding system and your horizontal cladding system can occupy the same floor space and share the same operator interface.

ARC-05HVGT Bore Cladding System

Features Newly-designed, innovative streamline ARC 5 control unit with weld schedule storage, tri-pulse capability, 100% continuous AVC that …

ARC-05HVTE Horizontal, Vertical, and Tilt Cladding System

Available in 2500lb or 6500lb capacity.

The ARC-05HVTe is an automated system that has the capability to weld in the horizontal and vertical position, or and any angle between the 0 and 90-degree positions on the ID and OD of cylindrical parts.

The ability to position part improves bead shape, weld chemistry, and improves overall ease of operation and usability of the welding process at high deposition rates.

ARC-05i Rotating Head Cladding System

The ARC-05i packs a fully operational control into a cost-effective design with a servo-controlled rotating torch head. The 80” diameter with radius corner straight welds, linear boom and rotating base, and integrated AVC are combined to interpolate desired torch paths much like a robotic arm.

ARC-05P Manipulator Bore Cladding System

Features Standard ARC-05P+ PLC control with touch screen operator interface, weld schedule storage, AVC, and teach and repeat …

ARC-05PL Compact Bore Cladding System

The ARC-05PL is a compact, cost-effective design that fits cladding applications on components up to a diameter of 40 in (1.02 m) and 5,000 lb (2268 kg). It’s a lighter version of ARC-05P+.

The system still retains all the features the ARC-05P+ is renowned for such a simple operation, cutting-edge controls, high-quality precision, comprehensive data logging, and robust dependability.

ARC-05PLh – Horizontal Bore Cladding System

Features Includes weld monitoring with a built-in camera Does ID and OD Hotwire TIG welding Frame-mounted safety switches …

ARC-05XP Bore Cladding System

The ARC-05XP packs all the power and functionality of the smaller ARC-05PL into a larger design that perfectly fits cladding applications on components up to a diameter of 60 in (1524 mm) and 20,000 lbs (9072 kg).

The ARC-05XP retains all the renowned features of its predecessor, the ARC-05P+, such a simple operation, cutting-edge controls, high-quality precision, comprehensive data logging, and robust dependability.

ARC-06B CNC PTAW Bearing Welding System

Continuous path and coordinated motion are integrated with a multi-axis manipulator and titling turntable to position the part and torch during the welding operations. It is capable of welding “journal bearings,” “thrust face,” “pin-O.D.,” and “pin end” welds.

ARC-06G CNC GTAW BORE CLADDER SYSTEM

The ARC-06G has a rotary torch head controlled for continuous rotation, automatic torch centering software, and real-time control of weld amps, weld volts, hotwire volts, wire feed speed, and more.

ARC-06L CNC PTAW Lathe

ARC 5-Axes CNC Control System with HMI Operator Interface ARC Welding Software Integrated into the CNC controller Machine …

ARC-06S CNC SAW BOP WELDING SYSTEM

The ARC-06S has a PMAC CNC controller, 5-axis fully-automated coordinated motion, cross slides with 94” vertical travel and 72” horizontal travel, and a cross slide mast on servo linear travel.

ARC-08G PAC PLASMA ARC GOUGING SYSTEM

Features: Removes metal with electric arc plasma Smooth finish with minimum ripples Depth control Simple chuck for gripping …

ARC-08P PLC GMAW DRILL PIPE HARD BANDER

The ARC-08P has a simplified control unit for automatic drill pipe hardbanding. The system automatically steps between bands with programmable a stop. It includes a complete GMAW welding package,  headstock with 3-jaw chuck, controls, and cross slides.  Tilting & Data-logging options are available.

ARC-08PP PORTABLE GMAW DRILL PIPE HARD BANDER

The ARC-08PP comes with a touch screen interface, a mounted goose-neck trailer, a simplified control unit with stored welding parameters, a 500 amp diesel power supply, 20 KW auxiliary power, and an on-board hydraulic power unit. With stored parameters and automatic step-between bands, the operator positions the torch at the start and puts the system in cycle. The system automatically stops once it reaches the programmed number of beads.

Loading
SCROLL UP